The United States Has Zero National Security

0
255

by Paul Craig Roberts, Paul Craig Roberts:

In his newly published book, Nuclear High-Attitude Electromagnetic Pulse, Steven Starr shows that all it takes is one nuclear explosion to shut down  the United States and throw the population back into the Dark Ages.  The electric power grid would be destroyed along with the communications system, the cooling systems at nuclear power plants and all electronic devices.  The reason is that civilian infrastructure is not protected from ElectroMagneticPulse (EMP). The military has taken steps to shield its weapon and communication systems, but nothing has been done to protect civilian infrastructure.  Bills mandating EMP protection have been defeated in Congress.  

TRUTH LIVES on at https://sgtreport.tv/

Starr reports that only 4% of the US military budget is required to shield the power grid and civilian infrastructure.  Instead, the Washington idiots waste trillions of dollars in pointless wars in Afghanistan, Iraq, Libya, Serbia, Syria, Yemen, Palestine, and Ukraine.  

American cities would suffer no effects from blast and fire, such as would be produced by ground level detonation, but the consequences would be just as dire.  Starr describes them in a summary on his website:  https://nuclearfamine.org/connect/ 

Effects of a single high-altitude nuclear detonation over the Eastern U.S.

“105 miles above Ohio, a single nuclear warhead explodes. Because it is far above the atmosphere, there will be no blast or fire effects felt on Earth, however, this high-altitude nuclear detonation will create a gigantic electromagnetic pulse or EMP.

“In one billionth of a second, the initial EMP E1 wave will cause massive voltages and currents to form within power lines, telecommunication lines, cables, wires, antennas, and any other electrically conductive material found beneath the nuclear detonation in a circular area covering hundreds of thousands of square miles.

“Within this region, under ideal conditions, the E1 wave will produce 2 million volts and a current of 5,000 to 10,000 amps within medium distribution power lines. Any unshielded modern electronic devices that contain solid-state circuitry, which are plugged into the grid, will be disabled, damaged, or destroyed. This includes the electronic devices required to operate all critical national infrastructure.

“Unshielded electronic devices within ground, air, and sea transportation systems, water and sanitation systems, fuel and food distribution systems, water and sanitation systems, telecommunication systems, and banking systems would all be simultaneously knocked out of service – and all these systems would be disabled until the solid-state electronics required to operate them could be repaired or replaced.

“The E1 wave will also instantly destroy millions of glass insulators found on 15 kilovolt-class electric power distribution lines. 78% of all electricity in the US is delivered to end users (residential, agricultural, commercial) through these 15 kV power lines. The loss of a single insulator on a line can knock out power distribution on the entire line.

“At the same instant, the massive voltage and current induced by the E1 wave will damage and destroy the relays, sensors, and control panels at 1783 High Voltage Substations, knocking out the entire electric power grid in the eastern half of the United States.

“One to ten seconds after the nuclear detonation, the following EMP E3 wave would induce powerful current flows in power lines including lines that are both above and below ground. E3 would damage or destroy many – if not most – of the Large Power Transformers and Extra High Voltage Circuit Breakers required for the long-distance transmission of about 90% of electrical power in the United States.

“The loss of Large Power Transformers and Extra High Voltage Circuit Breakers would mean that entire regions within the United States would be left without electric power for up to a year or longer. This is because Large Power Transformers are not stockpiled and the current wait time for their manufacture is 18 to 24 months; they must be custom designed and manufactured and about 80% are made overseas. They each weigh between 200 and 400 tons and must be shipped by sea and moving them to their final destination is quite difficult even under normal circumstances.

“Because nuclear power plants are not designed to withstand the effects of EMP, the solid-state electronics within their backup electrical and cooling systems would also be damaged and disabled. The failure of their Emergency Power Systems and active Emergency Core Cooling Systems will make it impossible to cool their reactor cores after emergency shutdown; this will quickly lead to reactor core meltdowns at dozens of nuclear power plants.

“To summarize, a single nuclear high-altitude electromagnetic pulse can instantly take out most or all of the US power grid while simultaneously destroying the solid-state electronic devices required to operate US critical national infrastructure – including the safety systems at nuclear power plants. Following a nuclear EMP, the people of the US would suddenly find themselves living in the conditions of the Middle Ages for a period possibly as long as a year – most Americans would not be able to survive such circumstances.

“For less than 4% of the US national defense budget, the US power grid and critical infrastructure can be shielded from EMP. However, the political will to implement this protection has not yet been found, so Americans remain very much at risk.”

Read More @ PaulCraigRoberts.org